Home | Checkout | Contact | Help | Products | Services  
 
  PRODUCTS    
Home
All Products
Services
Order Tracking
Help
Contact Us
About Us
Support
Site Map
Catalog

Shopping Cart  Shopping Cart
0 Product(s) in cart
Total $0.00
» Checkout

 
> Search Wishlist
Member Login
Email

Password

Remember Me

Forgot your password?

Register here.

OUR EBAY STORE

Solution Graphics

  
There are 64 product(s) in this category
Sort by: Number of results:


List View Grid View

Home » Musician Equipment » Speaker Components (Drivers)

  Checkout

Dayton TIT280C-4 10" Titanic Mk III Subwoofer 4 Ohm
Previous1 of 2Next
Dayton TIT280C-4 10" Titanic Mk III Subwoofer 4 Ohm

Details 
Building on the reputation of the 10" MKII subwoofer, the MKIII sub excels at producing very clean and musical bass in a small enclosure. Reaping the benefits of the MKIII improvements, this woofer is now even better for medium-duty home theater applications in small-to-medium sized rooms. The small 10" size is perfect for multi-driver or multi-subwoofer situations. With an upgraded 2-1/2" voice coil and 18.7mm of Xmax this subwoofer is great for home and automotive applications in both sealed and vented enclosures.
List Price: $299.99
Your Price: $155.79
Dayton TS320D-4 12" Titanic Mk IV Subwoofer 4 Ohm
Previous1 of 2Next
Dayton TS320D-4 12" Titanic Mk IV Subwoofer 4 Ohm

Details 

Dayton Audio TS320D-4 12" Titanic Mk 4 Subwoofer 4 Ohm

Dayton Audio's Titanic series subwoofers are world-renowned for their ability to create deep, hard-hitting bass with minimum distortion. This line of subwoofers has always been known for prodigious amounts of Xmax, relatively high sensitivity specifications, and an amazing ability to handle power. 

Dayton Audio takes everything that has made the Titanic subwoofers stand out as top-of-the-line subwoofers in the loudspeaker industry and improves upon them in the Mk 4 generation. The TS320D-4 12" Titanic Mk 4 subwoofer has been redesigned from the ground up to improve upon every aspect possible, while maintaining the essence of the Dayton Audio Titanic series.
List Price: $299.99
Your Price: $189.00
Out of Stock
Notify Me when it arrives?
Dayton TW-0.25MA 0.25 ft 2-Way Cabinet Pair Maple
Dayton TW-0.25MA 0.25 ft 2-Way Cabinet Pair Maple

Details 
If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and braces, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a very tight-grained, real maple wood veneer with a semi-gloss finish. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. The cabinet is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 12" H x 7.5" W x 10" D. Note: Cabinet dimensions do not include grill
List Price: $199.99
Your Price: $139.75
Dayton TW-0.38BK 0.38 ft 2-Way Cabinet Gloss Black
Previous1 of 2Next
Dayton TW-0.38BK 0.38 ft 2-Way Cabinet Gloss Black

Details 
If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and braces, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a piano-quality black lacquer finish that is extremely glossy and reflective. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. The cabinet is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 14" H x 8" W x 10.5" D. Note: Cabinet dimensions do not include grill
List Price: $129.99
Your Price: $84.85
Dayton TW-0.38CH 0.38 ft 2-Way Cabinet Cherry
Dayton TW-0.38CH 0.38 ft 2-Way Cabinet Cherry

Details 
If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and braces, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a very rich, genuine cherry wood veneer with a semi-gloss finish. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. The cabinet is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 14" H x 8" W x 10.5" D. Note: Cabinet dimensions do not include grill
List Price: $99.99
Your Price: $84.85
Dayton TW-0.38MA 0.38 ft 2-Way Cabinet Maple
Dayton TW-0.38MA 0.38 ft 2-Way Cabinet Maple

Details 
If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and braces, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a very tight-grained, real maple wood veneer with a semi-gloss finish. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. The cabinet is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 14" H x 8" W x 10.5" D. Note: Cabinet dimensions do not include grill
List Price: $99.99
Your Price: $84.85
Dayton TW-0.50BK 0.50 ft 2-Way Cabinet Gloss Black
Previous1 of 2Next
Dayton TW-0.50BK 0.50 ft 2-Way Cabinet Gloss Black

Details 
If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and braces, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a piano-quality black lacquer finish that is extremely glossy and reflective. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. The cabinet is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 14" H x 8.5" W x 12" D. Note: Cabinet dimensions do not include grill
List Price: $129.99
Your Price: $89.85
Dayton TW-0.50MA 0.50 ft 2-Way Cabinet Maple
Previous1 of 2Next
Dayton TW-0.50MA 0.50 ft 2-Way Cabinet Maple

Details 
If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and braces, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a very tight-grained, real maple wood veneer with a semi-gloss finish. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. The cabinet is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 14" H x 8.5" W x 12" D. Note: Cabinet dimensions do not include grill
List Price: $129.99
Your Price: $89.85
Dayton TW-0.75BK 0.75 ft 2-Way Cabinet Gloss Black
Previous1 of 2Next
Dayton TW-0.75BK 0.75 ft 2-Way Cabinet Gloss Black

Details 
If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and braces, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a piano-quality black lacquer finish that is extremely glossy and reflective. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. The cabinet is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 17" H x 10" W x 12.5" D. Note: Cabinet dimensions do not include grill
List Price: $149.99
Your Price: $124.90
Dayton TW-0.75CH 0.75 ft 2-Way Cabinet Cherry
Dayton TW-0.75CH 0.75 ft 2-Way Cabinet Cherry

Details 
If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and braces, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a very rich, genuine cherry wood veneer with a semi-gloss finish. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. The cabinet is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 17" H x 10" W x 12.5" D. Note: Cabinet dimensions do not include grill
List Price: $199.99
Your Price: $124.90
Dayton TWC-0.25BK 0.25 ft 2-Way Curved Cabinet Pair Black
Previous1 of 2Next
Dayton TWC-0.25BK 0.25 ft 2-Way Curved Cabinet Pair Black

Details 
If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and bracing, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a piano-quality black lacquer finish that is extremely glossy and reflective. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. Attractive curved-sided design is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 12" H x (7.5" Front, 4.5" Back) W x 11" D. Note: Cabinet dimensions do not include grill
List Price: $199.99
Your Price: $174.50
Dayton TWC-0.25CH 0.25 ft 2-Way Curved Cabinet Pair Cherry
Previous1 of 2Next
Dayton TWC-0.25CH 0.25 ft 2-Way Curved Cabinet Pair Cherry

Details 
If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and bracing, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a very rich, genuine cherry wood veneer with a semi-gloss finish. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. Attractive curved-sided design is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 12" H x (7.5" Front, 4.5" Back) W x 11" D. Note: Cabinet dimensions do not include grill
List Price: $199.99
Your Price: $174.50
Dayton TWC-0.25MA 0.25 ft 2-Way Curved Cabinet Pair Maple
Dayton TWC-0.25MA 0.25 ft 2-Way Curved Cabinet Pair Maple

Details 
If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and bracing, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a very tight-grained, real maple wood veneer with a semi-gloss finish. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. Attractive curved-sided design is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 12" H x (7.5" Front, 4.5" Back) W x 11" D. Note: Cabinet dimensions do not include grill
List Price: $199.99
Your Price: $174.50
Dayton TWC-0.38BK 0.38 ft 2-Way Curved Cabinet Gloss Black
Previous1 of 2Next
Dayton TWC-0.38BK 0.38 ft 2-Way Curved Cabinet Gloss Black

Details 
If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and bracing, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a piano-quality black lacquer finish that is extremely glossy and reflective. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. Attractive curved-sided design is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 14" H x (8" Front, 4.5" Back) W x 11.8" D. Note: Cabinet dimensions do not include grill
List Price: $149.99
Your Price: $108.98
Dayton TWC-0.38CH 0.38 ft 2-Way Curved Cabinet Cherry
Previous1 of 2Next
Dayton TWC-0.38CH 0.38 ft 2-Way Curved Cabinet Cherry

Details 
If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and bracing, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a very rich, genuine cherry wood veneer with a semi-gloss finish. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. Attractive curved-sided design is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 14" H x (8" Front, 4.5" Back) W x 11.8" D. Note: Cabinet dimensions do not include grill
List Price: $149.99
Your Price: $108.98
Dayton TWC-0.50MA 0.50 ft 2-Way Curved Cabinet Maple
Previous1 of 2Next
Dayton TWC-0.50MA 0.50 ft 2-Way Curved Cabinet Maple

Details 
If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and bracing, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a very tight-grained, real maple wood veneer with a semi-gloss finish. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. Attractive curved-sided design is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 14" H x (8.5" Front, 4.5" Back) W x 13" D. Note: Cabinet dimensions do not include grill
List Price: $149.99
Your Price: $115.50
Dayton TWC-0.75BK 0.75 ft 2-Way Curved Cabinet Gloss Black
Previous1 of 2Next
Dayton TWC-0.75BK 0.75 ft 2-Way Curved Cabinet Gloss Black

Details 
If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and bracing, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a piano-quality black lacquer finish that is extremely glossy and reflective. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. Attractive curved-sided design is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 17" H x (10" Front, 4.5" Back) W x 14.5" D. Note: Cabinet dimensions do not include grill
List Price: $199.99
Your Price: $154.45
Dayton TWC-0.75CH 0.75 ft 2-Way Curved Cabinet Cherry
Previous1 of 2Next
Dayton TWC-0.75CH 0.75 ft 2-Way Curved Cabinet Cherry

Details 
If you want to create a loudspeaker without investing the time and money building one from scratch, these cabinets are the answer. Dayton Audio pre-made enclosures eliminate the time-consuming and messy steps of cutting wood, assembling the panels and bracing, gluing veneer, and finishing. Using Dayton Audio speaker cabinets will guarantee superior results every time. 3/4" MDF side and back panel construction is reinforced by a 3/4" MDF "shelf" brace running vertically up the sides and across the top and bottom. The entire cabinet, including the rear, is covered with a very rich, genuine cherry wood veneer with a semi-gloss finish. The baffle is 1" MDF with a black satin finish and rabbeted construction. It offers the flexibility of the B-REX replacement system and comes pre-finished without any driver cutouts. The grill is secured to the baffle by neo magnets in line with the machine screws that fasten the baffle to the enclosure. Two 1/4" holes on the back simplify installation of Dayton Audio knock-in binding posts. Attractive curved-sided design is extremely rigid and solid, with minimized panel resonance. Complete with baffles, hardware, and grills. Add crossover parts, port tubes, damping materials, binding posts, and your drivers to create a complete system rivaling the appearance of the most lavishly presented audiophile speakers. Dimensions: 17" H x (10" Front, 4.5" Back) W x 14.5" D. Note: Cabinet dimensions do not include grill
List Price: $199.99
Your Price: $154.45
Eminence Definimax 4018LF 18" Driver
Eminence Definimax 4018LF 18" Driver

Details 
Recommended for professional audio and bass as a low distortion subwoofer in single or multi-driver designs. Specifications: *Power handling: 800 watts RMS/1,600 watts max *VCdia: 4" *Le: 4.78 mH *Impedance: 8 ohms *Re: 6.19 ohms *Frequency range: 36-200 Hz *Magnet weight: 109 oz. *Fs: 32 Hz *Sensitivity: 95 dB 1W/1m *Vas: 8.4 cu. ft. *Qms: 10.38 *Qes: 0.36 *Qts: 0.35 *Xmax: 7.9 mm *Dimensions: Overall Diameter: 18", Cutout Diameter: 16.57", Mounting Depth: 8.13".
List Price: $399.99
Your Price: $304.99
Eminence Deltalite II 2512 Neo 12" Driver
Eminence Deltalite II 2512 Neo 12" Driver

Details 
Recommended for professional audio as a mid/hi or full range and monitor; also for bass guitar. Works well in sealed or vented enclosures. Specifications: *Power handling: 250 watts RMS/500 watts max *VCdia: 2.5" *Le: 0.46 mH *Impedance: 8 ohms *Re: 5.04 ohms *Frequency range: 48-4,000 Hz *Magnet weight: 7 oz. *Fs: 37 Hz *Sensitivity: 99.9 dB 1W/1m *Vas: 5.2 cu. ft. *Qms: 3.13 *Qes: 0.44 *Qts: 0.39 *Xmax: 4.9 mm *Dimensions: Overall Diameter: 12.38", Cutout Diameter: 11.06", Mounting Depth: 6.06".
List Price: $199.99
Your Price: $222.99

« Previous | 1 | 2 | 3 | 4 | »

This month's specials:
 - Peripherals
- Service Manuals
- Audio
- Video
- Repair Service
Electronics Gear
offers a full online  store available to you 24/7 and here are some of the great products at the best prices we sell.

Austin Air Health Mate Standard HM-400 Air Purifier Cleaner
ELECTRONICS GEAR
1-702-447-7551
 customersupport@
electronics-gear.net
    Home | Contact | Privacy Policy | Returns | Terms of Use | Warranty  

Copyright ? 1994-2024 Designed and Hosted by Electronics Gear All Rights Reserved