Dell PowerEdge 2950 Server Specifications

Form factor

• 2U rack height

PowerEdge 2950 Server Processors

• Up to two Quad-Core Intel Xeon 5300 sequence processors at up to 3.0GHz
• Up to two Quad-Core Intel Low Volt Xeon 5300 sequence processors at up to 2.0 GHz
• Up to two Dual-Core Intel Xeon 5100 sequence processors at up to 3.0GHz
• Up to two Dual-Core Intel Low Volt Xeon 5100 sequence processors at 2.33GHz
• Up to two Dual-Core Intel Xeon 5000 sequence processors at up to 3.0GHz

Front side bus

• Intel Xeon 5300 Sequence: Dual Independent 1066MHz or 1333MHz;
• Intel Xeon 5100 Sequence: Dual Independent 1066MHz or 1333MHz; Intel Xeon 5000 Sequence: Dual Independent 667MHz

Cache

• Intel Xeon 5300 Sequence: 2x4MB
• Intel Xeon 5100 Sequence: 4MB
• Intel Xeon 5000 Sequence: 2x2MB

Chipset

• Intel 5000X

PowerEdge 2950 Server Memory

• Up to 32GB (8 FBD DIMM slots): 256MB/512MB/1GB/2GB/4GB Fully Buffered DIMMs (FBD) in matched pairs, 533MHz or 667MHz

I/O slots

• Three PCI slots, either PCIe riser with three PCI Express slots (one x4 (x8 connector) and two x8) or two PCI-X 64-bit/133MHz and one PCI Express x8 slot

Drive controller

• 4 port SAS 5/i integrated SAS controller (no RAID)

RAID controller

• Optional PERC 5/i integrated SAS/SATA daughtercard controller with 256MB cache, PERC 4e/DC, PERC 5/e adapter

PowerEdge 2950 Server Drive bays

• 3 hard drive base options:
• 8 x 2.5 Hard Drive Option: 2.5 HD Option: up to 8 SAS HDs (10K);
• 4 x 3.5 Hard Drive Option: 3.5 HD Option: up to 4 SAS (10K/15K) or SATA (7.2K) drives;
• 6 x 3.5 Hard Drive Option: 3.5 HD Option: up to 6 SAS (10K/15K) or SATA (7.2K) drives;
• Peripheral bay options; Floppy Drive, DAT72 Tape Drive (not available with 6 x 3.5 hard drive base);
• Slim optical drive bay with choice of CD-ROM, DVD-ROM or Combo CD-RW/DVD-ROM

Maximum internal storage

• Up to 4.5TB: six 750GB hot-plug SATA (7.2 K RPM)

PowerEdge 2950 Server Hard drives

• 2.5 SAS (10K RPM): 36GB, 73GB;
• 3.5 SAS (10K RPM): 73GB, 146GB, 300GB, or 400GB;
• 3.5 SAS (15K RPM): 36GB, 73GB, 146GB;
• 3.5 SATA (7.2K RPM): 80GB, 160GB, 250GB, 500GB, 750GB SATA
• SAS, SCSI and fibre channel storage systems

External storage

• Tape backup options
• Internal: PV100T (DAT 72) with multibay
• External: PowerVault DAT 72, 110T, 114T, 122T, 124T, 132T, 136T, 160T and ML6000

Network interface card

• Dual embedded Broadcom NetXtreme II 5708 Gigabit2 Ethernet NIC with fail-over and load balancing. TOE (TCPIP Offload Engine) supported on Microsoft Windows Server 2003, SP1 or
  higher with Scalable Networking Pack

Power supply

• AC configuration with standard single or redundant 750W hot-plug auto-switching universal 110/220V AC power supplies
• DC configuration with redundant hot plug -48 to -60 V20 A DC power supplies ECC FBD memory, SDDC, Spare Bank; hot-plug hard drives; optional hot-plug redundant
  power supplies;

Supplier Warranty:

• 3 years limited parts replacement warranty
• DELL FACTORY RECERTIFIED UNIT-FACTORY REBUILT TO LIKE NEW CONDITION
  

EMAIL US FOR A CUSTOM SYSTEM QUOTE.WE CAN BUILD ANY CONFIGURATION YOU REQUIRE

DELL POWEREDGE 2950 2x-DUAL XEON QUAD CORE 1.86GHZ CPU'S 1066MHZ FSB 8MB CACHE, 8GB DDR2 PC5300 ECC MEMORY,  PERC 5I ON-BOARD RAID CONTROLLER WITH 256MG RAID MEMORY, 2TB (4x-500GB 10K RPM SATA HARD DRIVES, DVD ROM DRIVE, DUAL 2x-10/100/1000 NETWORK CARDS, DUAL 2x- 750 WATT POWER SUPPLIES.

DELL FACTORY RECERTIFIED UNIT-FACTORY REBUILT TO LIKE NEW CONDITION,FULLY PROFESSIONAL TESTED BEFORE SHIPPED

3 YEARS PARTS REPLCEMENT WARRANTY - FREE